Do you own a room that could use a ceiling fan to cool it down Installing a ceiling fan on your own is relatively easy, if you are simply replacing a light fixture that is already in the appropriate location. beginner woodworking Since a ceiling fan must have the same electrical wiring as your light fixture, the only major thing that requires to be done is to replace the workbox that can handle the weight of the ceiling fan. Hanging your brand new ceiling fan on an pre-existing box that won't support the extra weight of the fan could end up in disaster. Before you begin your project, go through the guidelines for the fan you have selected, and make certain that you have all of the needed tools.

When you are setting up the fan on a cathedral ceiling, you may want to obtain additional parts for extending the fan straight down lower woodworking plans. Whenever you have every little thing ready to go, the very first thing you ought to do is make sure that the breaker is turned off so no power goes to the light fixture. Anytime you remove the light fixture, check to see if the current workbox can cope with the increased weight. Generally they aren't designed for a ceiling fan, so you will have to add additional support. This could be done rather quickly if you have access to the attic, and are capable to get to the spot of the new fan.

All you want to do, is nail a 2x4 between the ceiling rafters, so that it touches the top of the workbox. Be positive that the 2x4 is secured and then attach on the box to the wood. If everything is carried out properly, the excess weight of the fan will now be fully supported by the wood and the screws. In the event that you are not able to do it from the attic or you have simply no attic, you will have to create a cross bracing in your ceiling. This is more difficult to do, and most likely not as secure in the end, but definitely will have to do with no attic access.

At this point, after setting up the fan as stated by the instructions, you are ready to hang your new fan. The issue is to hold onto the fan while attaching the wiring. Based on the fan, some come with a hanging frame, and others have a bracket with a J hook that lets you hold the motor housing. Many fans have a chain to control the speed of the fan when the wall switch turns the device on or off. If you prefer a light kit along with your fan, they can be monitored by either chain or wall switch.

After that, just adhere to the wiring directions, usually as simple as connecting the two black wires, both white wires, and the two ground wires. As soon as you have completed the wiring, all you need to do now is connect the blades. Once this is all carried out, it is time to change the breaker back on to see if it works.