Do you have room that might utilize a ceiling fan Its certainly not hard to install a ceiling fan by yourself if you are considering to replace a light fixture. Virtually all of the wires you need is already available so the only thing is to exchange the current workbox with one that is designed for the weight of a ceiling fan. furniture woodworking plans Hanging your brand new ceiling fan on an existing box that won't support the additional weight of the fan could end up in disaster. Before you get started with your project, examine the instructions for the fan you have bought, and make certain that you have all of the needed tools.

If you're going to install the fan on a cathedral type ceiling, you might want to get parts to boost the fan lower. When you have all the stuff all set, the first thing you must do is make sure that the breaker is turned off so no power goes to the light fixture. When you take out the light fixture, verify to see if the existing workbox can cope with the extra weight. Usually they aren't created for a ceiling fan, so you will need to add more additional support. Adding support to the workbox is not that tough if you have admittance to the light fixture from the attic.

All you need to do, is nail a 2x4 inside the ceiling rafters, so it touches the top of the workbox. Make sure that the 2x4 is secured and then bolt on the box to the wood. If you did it effectively, the body weight of the fan should be efficiently supported by the 2x4 wood and screws. In cases where you are unable to do it from the attic or you have basically no attic, you will need to include a cross bracing in your ceiling woodworking plans. Performing this is more of a challenge and may not be as secure as using a 2x4 but it is the best you can do if you dont get access to the attic.

At this point, after setting up the fan as stated by the instructions, you are ready to hang any fan. The task is to hold onto the fan while connecting the wiring. woodworking plans It will rely on the kind of fan you have, many come with a bracket with a J hook while others have a clinging frame. Many fans, there will be a wall mount switch with a chain to manage the speed of the fan. If you also set up a light kit with the fan, each can be monitored by a wall switch or chain.

Following, just stick to the wiring directions, usually as simple as connecting the two black wires, the two white wires, as well as the two ground wires. Now all you want to do is accomplish assembling the fan according to the guidelines, by connecting the fan blades. Once this is all done, it is time to change the breaker back on to see if it works.